Guide · Materials Engineering
Specifying nylon 12 for additive manufacturing: a working guide
Most PA12 drawings arrive written for injection molding and get mentally translated at the quote desk. Write the drawing for the powder bed instead, and parts come back right the first time.
Nylon 12 is the workhorse of powder-bed printing for a reason: near-uniform strength in every direction, real chemical resistance, and batch-to-batch consistency good enough to put a shipping product on. But a spec written with molding assumptions fights the process. Here's what to put on the drawing — and what to leave off.
Why PA12 owns the powder bed
In selective laser sintering, unfused powder supports the part, so there are no support scars, no draft angles, and no gates to hide. Hinges print pre-assembled; internal channels just exist. The result behaves close enough to molded nylon that engineers routinely use printed PA12 to validate parts destined for a tool — and increasingly, to skip the tool at low volumes altogether.
Dimension the function, not the habit
Molding drawings carry tolerances inherited from what steel tooling makes free. On a printed part, every tightened dimension is inspected individually — so tolerance only what the part's function actually needs, and flag those dimensions explicitly as critical. A drawing with four critical callouts and honest general tolerances produces cheaper, faster, more consistent parts than one carrying blanket precision it never uses. For the current process limits on a specific geometry, ask with the quote — numbers belong to the machine and the day, not a blog post.
Features that love — and fight — the process
Generous radii, ribs instead of bulk, and walls of consistent body all print beautifully. The fights come from extremes: very thin features that flex during cleaning, massive solid sections that want to retain heat, and deep narrow channels that trap powder. None of these are disqualifiers — they're conversations. Put a note on the drawing and the DFM review will come back with the version that works.
Say which finish state you're dimensioning
PA12 leaves the machine in a professional matte. From there it can be media-tumbled smoother or dyed through. Each step belongs on the spec — and critically, say whether dimensions apply as-printed or after finishing, so inspection measures the part you meant.
Spec for the reorder, not just the order
The quiet advantage of nylon 12 additive manufacturing is continuity: the same powder and a locked build profile mean the parts you reorder next spring match the ones you approved this fall. Put the revision level on the drawing, keep it with us, and a repeat run is one email. Teams running PETG fixtures alongside PA12 structural parts manage both on the same standing basis.
Send the drawing with the file
An STL says what the part looks like; the drawing says what it's for. Send both and the quote comes back from an engineer who read them — from the production floor in Newark that will also run every reorder, a courier ride from New York City.
Have a PA12 part in development?
Send the model and the drawing — DFM notes and a quote come back from the engineer who'll run the build.